How to Fix the Hayward Heater IF Code [SOLVED] (2024)

Occasionally, I’ve encountered the IF code when asked to come out to a client’s house to troubleshoot their Hayward pool heater issues. This error code indicates an ignition failure, preventing the heater from starting. Ignition failures can be caused by various issues, ranging from minor problems to major malfunctions. In this article, I’ll cover the most common causes of the Hayward heater IF code and provide step-by-step instructions on how I fixed this issue.

Understanding the Hayward Heater IF Code

Before we dive into the troubleshooting steps, let’s first understand what the Hayward heater IF code means. The IF code appears on the heater display when the ignition sequence fails to complete. The heater attempts to light the burner three times before displaying the IF code and shutting down. The code protects the heater from damage caused by a gas buildup or other ignition-related problems.

Common Causes of the Hayward Heater IF Code

There are several reasons your Hayward heater may be displaying the IF code. Here are the most common causes:

1. Gas supply issues: If your heater isn’t receiving a sufficient supply of gas, it won’t be able to ignite the burner. Check the gas valve and make sure it’s fully open. It would be best to verify that the gas line is clear of debris or blockages.
2. Pilot light problems: If the pilot light isn’t lit, the heater won’t be able to ignite the burner. Check the pilot light assembly and ensure it’s clean and debris-free. It would be best to verify that the pilot light’s gas supply is working properly.
3. Igniter issues: The igniter is responsible for lighting the burner. If it’s not functioning correctly, the heater won’t be able to start. Check the igniter for signs of wear or damage. You should also ensure that the igniter’s wires to the control board are properly connected.
4. Control board problems: The control board is responsible for regulating the various components of the heater. The heater may display the IF code if it’s not working correctly. Check the control board for signs of damage or wear. You should also ensure that all connections to the control board are properly connected.

Replacement Parts:

Steps I Used to Fix the Hayward Heater IF Code

Now that I’ve identified the common causes of the IF code, let’s go over the troubleshooting steps. Here’s what you should do:

1. Turn off the power to the heater: Before attempting any repairs, turn off the power to the heater. You can do this by flipping the circuit breaker that controls the heater.
2. Check the gas supply: Ensure the gas valve is fully open and the gas line is clear of any blockages or debris.
3. Verify the pilot light: Check the pilot light assembly and make sure it’s clean and free of debris. It would be best to verify that the pilot light’s gas supply is working properly.
4. Inspect the igniter: Check the igniter for signs of wear or damage. You should also ensure that the igniter’s wires to the control board are properly connected.
5. Check the control board: Inspect the control board for signs of damage or wear. You should also ensure that all connections to the control board are properly connected.
6. Restart the heater: Once you’ve addressed the problem, turn the power back on and attempt to restart it. If the heater still displays the IF code, you may need to call a professional for further assistance.

Conclusion

The Hayward heater IF code can be a frustrating problem, but it’s often caused by minor issues that can be easily fixed. By following the steps outlined in this article, you can identify and address the problem and hopefully prevent it from occurring. However, it’s best to call a professional for assistance if you’re uncomfortable or unsure about the process. With a little effort and knowledge, you can get your Hayward pool heater back up and running in no time.

Also see: Hayward Heater LO Code Fixes

Or if you are in need of a new heater, check out these new models:

FAQ’s